BDFRM - PRIMARY AMYL ACETATE, MIXED ISOMERS
- MSDS: BDFRM
- Manufacturer: UNION CARBIDE CORP INDUSTRIAL CHEMICALS DIV
- Product Name: PRIMARY AMYL ACETATE, MIXED ISOMERS
- National Stock Number: 6810-00-174-6604
Product Identification
Product ID:PRIMARY AMYL ACETATE, MIXED ISOMERS
MSDS Date:07/01/1992
FSC:6810
NIIN:00-174-6604
MSDS Number: BDFRM
Responsible Party
DANBURY, CT 06817-0001
US
Emergency Phone: 800-822-4357
Info Phone: 800-822-4357
Cage: 61637
Contractor
Telephone: 800-822-4357/732-563-5522 (MSDS)
Cage: 8D722
Ingredients
N-AMYL ACETATE (SARA III)
CAS: 628-63-7
RTECS: AJ1925000
Fraction By Weight: 65%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-METHYL BUTYL ACETATE (SEC-AMYL ACETATE)
CAS: 624-41-9
Fraction By Weight: 35%
ISOAMYL ACETATE (SARA III)
CAS: 123-92-2
RTECS: NS9800000
Fraction By Weight: <0.1%
OSHA PEL 100 PPM
ACGIH TLV: 100 PPM; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION MAY CAUSE
RESPIRATORY TRACT IRRITATION. INGESTION MAY CAUSE ABDOMINAL
DISCOMFORT. CONTACT WITH EYES MAY CAUSE IRRITATION. PROLONGED OR
REPEATED EXPOSURE MAY CAUSE SKIN IRRITATION. CH RONIC: NO ADVERSE
EFFECTS ANTICIPATED FROM AVAILABLE INFORMATION.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED- NASAL DISCHARGE, CHEST PAIN, COUGHING,
HEADACHE, NAUSEA, VOMITING, DIZZINESS, DROWSINESS, DISTURBED
VISION, UNCONSCIOUSNESS. EYES-STINGING, DISCOMFORT OR PAIN.
SKIN-LOCAL REDNESS, DISCOMFORT. INGESTED-ABDOMINAL DISCOMFORT,
NAUSEA,VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:NONE CURRENTLY KNOWN.
First Aid
First Aid:INGESTED-CALL A PHYSICIAN. IF CONSCIOUS, GIVE LARGE AMOUNTS
OF WATER & INDUCE VOMITING. INHALED-REMOVE TO FRESH AIR. IF NOT
BREATHING, GIVE ARTIFICIAL RESPIRATION. IF BREATHING DIFFICULT,
GIVE OXYGEN. GET MEDICAL ATTENTION. SKIN-REMOVE CONTAMINATED
CLOTHES. FLUSH WITH LOTS OF WATER. EYES-IMMEDIATELY FLUSH WITH LOTS
OF WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ATTENTION IF
IRRITATION PERSISTS.
Fire Fighting
Flash Point Method:TCC
Flash Point:107F,42C
Lower Limits:1.1
Upper Limits:7.5
Extinguishing Media:ALCOHOL-TYPE OR REGULAR FOAM, CARBON DIOXIDE OR DRY
CHEMICAL.
Fire Fighting Procedures:FIREFIGHTER SHOULD WEAR FULL PROTECTIVE
CLOTHING INCLUDING POSITIVE-PRESSURE SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:THIS MATERIAL MAY PRODUCE A FLOATING FIRE
HAZARD IN EXTREME FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:WEAR SUITABLE PROTECTIVE EQUIPMENT. COLLECT
FOR DISPOSAL. THIS PRODUCT MAY BE TOXIC TO FISH; AVOID DISCHARGE TO
NATURAL WATERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:FOR INDUSTRIAL USE ONLY. STORE IN A
COOL, DRY PLACE AWAY FROM INCOMPATIBLE MATERIALS AND SOURCES OF
IGNITION. USE WITH ADEQUATE VENTILATION.
Other Precautions:AVOID BREATHING VAPOR. AVOID CONTACT WITH EYES, SKIN
AND CLOTHING. KEEP CONTAINER CLOSED.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR EMERGENCY OCCURS; USE NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS. USE IAW 29 CFR 1910.134 AND MANUFACTURER'S
RECOMMENDATIONS.
Ventilation:USE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:BUTYL
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:EYE WASH STATION & SAFETY SHOWER.
Work Hygienic Practices:WASH HANDS AFTER USE AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:295F,146C
Melt/Freeze Pt:M.P/F.P Text:-148F,-100C
Vapor Pres:4 MM HG
Vapor Density:4.5
Spec Gravity:0.8757
Evaporation Rate & Reference:0.42 (N-BUTYL ACETATE=1)
Solubility in Water:SLIGHT
Appearance and Odor:TRANSPARENT, COLORLESS LIQUID; MILD CHARACTERISTIC
ODOR.
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, NITRIC ACID, SODIUM HYDROXIDE, ALKALI METAL
HYDROXIDES.
Stability Condition to Avoid:NONE KNOWN.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.
Disposal
Waste Disposal Methods:INCINERATE AT A PERMITED FACILITY. DISPOSE OF IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.